Aqara Wireless Mini Switch (WXKG11LM) Stopped Working with Latest Z2M Update

[scienceguyroy]

I updated my Z2M tonight (03Jan25), and the Aqara Wireless Mini Switches (WXKG11LM) are no longer working. I'm getting "unknown entities" in my automations now. I've tried removing and adding them back in but to no avail. Has anyone else experienced this today?

[diligentia]

Yes, I am seeing the same with my WXKG11LM devices. I have two, and neither are working after update. I removed one to try repairing, but it isn't seen by Z2M when it is is pairing mode.

The Exposes tab shows:

Battery 100%
Voltage 3095mV
Device temperature 23°C
Power outage count 7
Action N/A
Linkquality 72lqi

[scienceguyroy]

I have a lot of switches, so I rolled back the version and will see if there is a non-breaking version coming out.

[jorisvervuurt]

The stuff you guys are mentioning probably has to do with the legacy Home Assistant options. These are mentioned in the list of breaking changes. I use these Aqara switches as well and will be moving everything over to 2.0.0 later today.

[Aresitoo]

And for a total noob how do you "move over" in the image it say use device trigger.. but how you change from the old to the new?

[jamesonuk]

And for a total noob how do you "move over" in the image it say use device trigger.. but how you change from the old to the new?

your existing automation will have an entity trigger on an action attribute. Replace that trigger with a device trigger where the actions should show. If you are using a blueprint you will need to update the blueprint

[Aresitoo]

thanks, that works for aqara double remote switch. Unfortunately, no long/double press available as before. But at least can turn on off some lights

[scienceguyroy]

If you do want to use a blueprint, I am using the one Joris referenced with success. It will have all the possibilities.

[jorisvervuurt]

thanks, that works for aqara double remote switch. Unfortunately, no long/double press available as before. But at least can turn on off some lights

Those may come available once you have triggered them. Try pressing the switch twice and then check Home Assistant. Do the same for the long press. ;-)

[Snille]

Another newbe here... :) How do i pick up the "presses" in Node-Red when the "action" sensor is no more? :)

[DrQueenKitas]

i’ve turned on all the options here and it started working again

[Snille]

Thank you!

[jorisvervuurt]

Please all be aware that enabling the legacy options might make things work again, but it is not a long term solution!

[olegrm]

I have a similar situation with the WXKG02LM_rev2(https://www.zigbee2mqtt.io/devices/WXKG02LM_rev2.html#aqara-wxkg02lm_rev2) in the “Home Assistant” generally disappeared the events “Click” and “action”. Only the battery remained.
z2m all ok

Thanks to Drqueenkitas for help

[PolommX]

I also turned on legacy while searching for a normal solution.