Need help finding out why zigbee2mqtt no longer starts after upgrading

[pullbox]

zigbee2mqtt was set to auto update and when 2.0 came out it automatically updated it and since then it was no longer running.
I tried to follow the guide available for the breaking changes but could not resolve that.
Tried to roll back to the previous version, but that version then also showed the same error as below.

At this point, I am running 2.0 and getting the following error in my log:

[11:06:23] INFO: Preparing to start...
[11:06:23] INFO: Socat not enabled
[11:06:23] INFO: Starting Zigbee2MQTT...
Starting Zigbee2MQTT without watchdog.
[2025-01-05 11:06:31] error: z2m: Error while starting zigbee-herdsman
[2025-01-05 11:06:31] error: z2m: Failed to start zigbee-herdsman
[2025-01-05 11:06:31] error: z2m: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start_crashes-runtime.html for possible solutions
[2025-01-05 11:06:31] error: z2m: Exiting...
[2025-01-05 11:06:31] error: z2m: Error: Error: Not supported, cannot set

How can I figure out what device / configuration is causing the "Not supported, cannot set" error.

Complication is that it is running within a docker container in HA which restarts every time the system stops because of the above.

Sorry, fairly a noob here. My system was running stable for years before this update.
Any help is appreciated.

[djurny]

Hi there,
Can you share some more details, like which adapter you are using and post your configuration.yaml files before and after the upgrade to 2.0.0 ?
Grt,

[pullbox]

HI Djurny,
I am using a Texa Instrument TI CC2531

socat

enabled: false
master: pty,raw,echo=0,link=/tmp/ttyZ2M,mode=777
slave: tcp-listen:8485,keepalive,nodelay,reuseaddr,keepidle=1,keepintvl=1,keepcnt=5
options: "-d -d"
log: false

mqtt

ase_topic: zigbee2mqtt
server: mqtt://192.168.83.34:1883
user: mqtt
password: xxxxxxxxxxx!
advanced:
  log_level: debug

serial (before)

port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E22285-if00

serial (new)

port: /dev/ttyACM0
adapter: zstack

[djurny]

Hi there,
Seems you are sharing the add-on configuration? Can you also share the actual configuration.yaml from before and after the upgrade?

In the meantime, what happens if you change the port value back to what is was before?

Grt,

[pullbox]

Do you need the imported yaml files as well like lights.yaml etc.?

[pullbox]

Here is the scripts.yaml as example:

"1576310844380":
  alias: Blink snap pictures
  sequence:
    - data:
        name: My Camera
      service: blink.trigger_camera
    - delay: 00:00:05
    - service: blink.blink_update
    - data:
        filename: /config/www/blink_entrance.jpg
      entity_id: camera.blink_entrance
      service: camera.snapshot

firstfloor_lights_toggle:
  sequence:
    - service: homeassistant.toggle
      entity_id:
        - light.entryway
        - light.hue_living_room
        - light.hue_living_room_2
        - switch.kasa_1
        - switch.kasa_2
        - switch.kasa_3
        - switch.kasa_4
        - switch.kasa_11
        - switch.kasa_8
        - switch.mini_1
        - light.stand_light_2
        - switch.nodeid_4_switch

firstfloor_lights_turn_off:
  sequence:
    - service: homeassistant.turn_off
      entity_id:
        - light.entryway
        - light.hue_living_room
        - light.hue_living_room_2
        - switch.kasa_1
        - switch.kasa_2
        - switch.kasa_3
        - switch.kasa_4
        - switch.kasa_11
        - switch.kasa_8
        - switch.mini_1
        - light.stand_light_2
        - switch.nodeid_4_switch

secondfloor_lights_turn_off:
  sequence:
    - service: homeassistant.turn_off
      entity_id:
        - light.c44f33ab5155_192_168_1_66
        - light.hue_white_lamp_1

livingroom_lights_toggle:
  sequence:
    - service: homeassistant.toggle
      entity_id:
        - light.hue_living_room
        - light.hue_living_room_2
        - light.stand_light_2

[pullbox]

Here is the Zigbee conf from the packages import:

input_boolean:
  zigbee_permit_join:
    name: Allow devices to join
    initial: off
    icon: mdi:cellphone-wireless

timer:
  zigbee_permit_join:
    name: Time remaining
    duration: 600 # Updated this to the number of seconds you wish

automation:
  - id: enable_zigbee_join
    alias: Enable Zigbee joining
    trigger:
      platform: state
      entity_id: input_boolean.zigbee_permit_join
      to: "on"
    action:
      - service: mqtt.publish
        data:
          topic: zigbee2mqtt/bridge/config/permit_join
          payload: "true"
      - service: timer.start
        data:
          entity_id: timer.zigbee_permit_join
  - id: disable_zigbee_join
    alias: Disable Zigbee joining
    trigger:
      - entity_id: input_boolean.zigbee_permit_join
        platform: state
        to: "off"
    action:
      - data:
          payload: "false"
          topic: zigbee2mqtt/bridge/config/permit_join
        service: mqtt.publish
      - data:
          entity_id: timer.zigbee_permit_join
        service: timer.cancel
  - id: disable_zigbee_join_timer
    alias: Disable Zigbee joining by timer
    trigger:
      - platform: event
        event_type: timer.finished
        event_data:
          entity_id: timer.zigbee_permit_join
    action:
      - service: mqtt.publish
        data:
          topic: zigbee2mqtt/bridge/config/permit_join
          payload: "false"
      - service: input_boolean.turn_off
        data:
          entity_id: input_boolean.zigbee_permit_join

## Zigbee Map
mqtt:
  sensor:
    - name: Zigbee2mqtt Networkmap
      # if you change base_topic of Zigbee2mqtt, change state_topic accordingly
      state_topic: zigbee2mqtt/bridge/networkmap/raw
      value_template: ">- {{ now().strftime('%Y-%m-%d %H:%M:%S') }}"
      # again, if you change base_topic of Zigbee2mqtt, change json_attributes_topic accordingly
      json_attributes_topic: zigbee2mqtt/bridge/networkmap/raw

    - name: Bridge state
      state_topic: zigbee2mqtt/bridge/state
      icon: mdi:router-wireless

[djurny]

Hi there,

[2025-01-05 13:50:54] error: 	z2m: Error: Adapter 'auto' does not exists, possible options: deconz, ember, ezsp, zstack, zboss, zigate
    at Function.create (/app/node_modules/.pnpm/zigbee-herdsman@3.2.1/node_modules/zigbee-herdsman/src/adapter/adapter.ts:80:19)
    at processTicksAndRejections (node:internal/process/task_queues:105:5)
    at Controller.start (/app/node_modules/.pnpm/zigbee-herdsman@3.2.1/node_modules/zigbee-herdsman/src/controller/controller.ts:132:24)
    at Zigbee.start (/app/lib/zigbee.ts:69:27)
    at Controller.start (/app/lib/controller.ts:142:13)
    at start (/app/index.js:161:5)

Seems that z2m is not able to get your adapter setting? Can you add the following to the configuration:

port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E22285-if00
adapter: zstack

And apologies, I assumed you were using zigbee2mqtt stand-alone and not using the add-on. Would be better to post this issue in the Official Zigbee2MQTT Home Assistant add-on github.

Grt,

[pullbox]

I did add already the adapter as posted above and that resolved it but back to the original issue. I will post this on the add-on forum.