Skip to content

Latest commit

 

History

History
37 lines (27 loc) · 1.51 KB

infomaniak.md

File metadata and controls

37 lines (27 loc) · 1.51 KB

Infomaniak

Configuration

Example

{
  "settings": [
    {
      "provider": "infomaniak",
      "domain": "domain.com",
      "username": "username",
      "password": "password",
      "ip_version": "ipv4",
      "ipv6_suffix": ""
    }
  ]
}

Compulsory parameters

  • "domain" is the domain to update. It can be example.com (root domain) or sub.example.com (subdomain of example.com).
  • "username" for dyndns (not your infomaniak admin username!)
  • "password" for dyndns (not your infomaniak admin password!)

Optional parameters

  • "ip_version" can be ipv4 (A records), or ipv6 (AAAA records) or ipv4 or ipv6 (update one of the two, depending on the public ip found). It defaults to ipv4 or ipv6.
  • "ipv6_suffix" is the IPv6 interface identifier suffix to use. It can be for example 0:0:0:0:72ad:8fbb:a54e:bedd/64. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.

Domain setup

Follow this guide to set up your subdomain including username and password for use in the configuration. do not use your infomaniak admin username and password in the configuration!

If you only plan on using IPv4, add your current IPv4 Address. If you only plan on using IPv6, add your current IPv6 Address. If you plan to use dual-stack (IPv4 and IPv6) addresses, it does not matter what ip-address you put in the dialog.