V2.1

• Boards with GPS can now send Real-GPS Beacon (also posible: GPS ambiguity of ~ 1 km).
• Received Packets in WebUI show real Local Time (NTP with GMT offset).

V2.0.1

• New EcoMode for Remote Digirepeaters without WiFi/WiFiAP, Screen, Leds (Example: LILYGO LoRa32 uses only 24mA, with WifiAP and all was 150mA). APRS Message/Queries can start/stop this mode too.
• Cross Frequency Digirepeater Rules improved.

V2.0

• Release Version Number Update changed to show that it has WebFlasher/Installer.
• Added Wemos S2 Mini DIY LoRa board.
• Added ESP32 DIY with E220 LLCC68 1W board
• Added Heltec Wireless Paper (Epaper Control still missing)
• Wx Packet length correction.
• Added Encoded Telemetry to GPS Beacon Packet to send Battery Voltage and External Voltage in one single packet. (Thanks @wb2osz for APRS1.2b info)
• Libraries update to get ready for SDK 3.0
• Added @RAKWireless Wisblock 4631 for initial digirepeater test

V1.0.5.1

• Improved Configuration Read process to avoid crashing when a new variable is added from one version to another.
• Fix Digirepeater Process (BackUpMode and only Rx Modes for iGate).

V1.0.5

• Web Authentication for WebUI. Thanks Mitja S57PNX.
• WIDE2-n added to WIDE1-n in Digirepeater Modes.
• External Voltage Divider Resistor configuration on WebUI. Thanks Tilen S54B.
• Personal Note information on WebUI for the Station. Thanks Tilen S54B.
• MAC address printed on serial output Network Management.
• New Boards Added.
• Many minor bugs and improvements.

V1.0.4.2

• Callsign Validation fix for MIC-E Packets. Thanks Helge SA7SKY.
• Personal Note information on WebUI for the Station. Thanks Tilen S54B.
• Better rules for 3rd Party Packet identification. Thanks Geoffrey F4FXL.
• External Voltage Divider Resistor input. Thanks Tilen S54B.
• Corrections for 3rd Party Packet Queries.

V1.0.4.1

-Callsign Validation Process correction (again)
-3rd Party Packet validation and analysis improvements (again ... sorry!)

V1.0.4

• Callsign validation process correction.
• All boards with 433 / 868 / 915 MHz versions.
• Tx packets coming from APRS-IS are (now) formatted into 3rd Party (as they should have been since the beginning).

V1.0.3

V1.0.3

• Added PacketBuffer for Rx (25 Seg) to avoid processing recent heard packets again.
• BME (Wx) Modules will be autodetected (I2C Address and if it is BME280/BMP280/BME680).
• HELTEC Wireless Stick Lite v3 support added.
• WebConfig: Update to control whether Messages and Objects should be Tx to RF.
• WebConfig: Experimental Backup-Digirepeater-Mode when "only" iGate Mode loses WiFi connection.
• WebConfig: Forced Reboot Mode added.
• WebConfig: Battery Monitor to make boards sleep below pre-defined voltages for internal (Battery) voltage and external Voltages
• T-Beams with Battery Monitoring as well.
• Callsign Validation Process
• Si7021 module added
• ESP32C3 + 1W LoRa Module (E22 400M30S) support added

V1.0.2

New Web Installer for LoRa_APRS_iGate